Despite being smaller than the typical car or boat engine, small gas engines are powerful enough for the equipment and vehicles they are built for, like snowmobiles and snowblowers. To keep these devices operating as they should, you need to know how to use them properly and take good care of them. This is especially important when it comes to seasonal tools that help make your life easier. Your snowblower is one such tool. Take care of it, and it will work hard for you.
However, if you do run into trouble with your snowblower this winter, try calling a local business that deals in boat motor repair in Fenton, MI, like Lake Ponemah Marina, for assistance with troubleshooting or repairs.
The key to having a properly functioning snowblower every winter is to clean and store it correctly after each snow season. Here are some maintenance tips to help you avoid the need for small engine repair during winter use:
- Don’t leave gas in the engine:
It’s best to deal with remaining fuel in your snowblower at the end of the season to ensure a problem-free start to next winter. Some experts suggest that you run the engine dry to stave off the effect of oxidized gas and ethanol. Carefully siphon out as much gas as you can and use it in other gas-powered tools or vehicles.
- Change the spark plugs:
Spark plugs ignite the fuel to start the engine so it can run. You will want to change them now if you haven’t already, but consult your owner’s manual for its recommended replacement frequency. Apply an anti-seize compound to the plug’s threads so the plug is easier to remove next season.
- Tighten fasteners:
The fact that a snowblower needs to be powerful enough to remove snow from your property also means there’ll be a lot of vibration running through it. Before you put your snowblower away for the season, check and tighten all the nuts and bolts, and don’t forget to check around the controls.
- Change the oil:
A modern day snowblower will have its own separate oil reservoir. If it’s a larger model, it has a bolt that needs loosening first. Similar to a car, the old oil in your snowblower needs to be removed and replaced with fresh oil, only filling to the maximum level inside the reservoir. Check your owner’s manual to find out the type and grade of oil to use.
- Inspect the tires:
Snowblowers roll around on tires, and to get the best traction, tires need the right amount of air pressure. Consult your manual or the side of the tire for the recommended pounds per square inch (psi), but 15 to 20 psi is typical.
Luckily, at Lake Ponemah Marina, we offer more than just boat motor repair in Fenton, MI this winter. We also provide small engine repairs for snowmobiles and snowblowers. Don’t hesitate to call us during the winter season for your small engine repair needs!
Categorised in: Uncategorized
This post was written by admin